D-MAX DMC-20SEC Manual de usuario Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
10
Macro Sensors Tel. (856) 662-8000
11 May, 2006 DMC-A2 Series (ALD-00029)
www.macrosensors.com
Pin No.
1
2
3
4
5
6
RS-232 (ASCII or Modbus) RJ-11 Socket
Reserved for future use
RXD. Received Serial
TXD. Transmitted Serial
+5 VDC to power external converters
Isolated Ground
Reserved for future use
Single Output
Dual Output
RXD1
TXD
RXD
0 V1
0 V
TXD1
RJ-45 Socket
(10/100 Base-T)
White/Orange TXD+
Blue –
White/Blue
White/Green RXD+
Orange TXD–
Green RXD–
White/Brown
Brown
7
8
Not applicable
Not applicable
Not applicable
Not applicable
3
4
5
2
61
4
8
3
2
1
7
6
5
RJ-45
STANDARD CARRIER BOARD
ETHERNET CARRIER BOARD
RJ-11
1 Positive (+)
TERMINAL 4
Analog Outputs
Positive for Analog Output 2 (ADV – Dual 10–0–10 V DC modules only).
2 Negative (–)
Negative for Analog Output 1 and 2.
TERMINAL 5
Serial Outputs
TERMINAL 6
Relay
Outputs
TERMINAL 6 connects electromechanical and
solid state relays (SSRs) to external applications.
Pins 1 to 3
Pins 1 up to 8
TERMINAL 5 connects the serial output module to external devices.
The standard carrier board supports a single or dual RS-232 ASCII or Modbus serial card connected thru an RJ-11 socket.
The Ethernet carrier board uses an RJ-45 socket at 10/100 Base-T.
Pins 1 up to 8
TERMINAL 4 connects the analog output module to external devices. A single 0~4 to 20 mA (standard) or (optional) 0 to 10 V DC or dual
10–0–10 V DC is supported on the standard or Ethernet carrier board.
Pin Name Description
Connector
1
2
3
4
5
6
7
8
Normally Open SP4
Common SP4
Normally Open SP3
Common SP3
Normally Open SP2
Common SP2
Normally Open SP1
Common SP1
Relay Modules with Four
5 A Form A Relays
Relay Module
Depending on the number of relays, standard
plug-in relay boards use up to 8 pins.
3 Positive (+)
Positive for Analog Output 1.
5A5A 5A 5A
SP4
SP3 SP2 SP1
123 54678
SP1SP2SP3SP4
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comentarios a estos manuales

Sin comentarios