AUTO FOCUS, DAY&NIGHT ZOOM COLOR CAMERA 사용 설명서 용 서 27X / 33X / 37X USER MANUAL
10 Focus and Zoom functions can be controlled by using external signals. * It can be broken by using Overvoltage. * MD (Motion Detection) Outpu
11 1) Menu Configuration MAIN SETUP MENU SSNR ▪ OFF ▪ ON WHITE BALANCE ▪ ATW ▪ MANUAL ▪ AWC →
12 1. Press the SET button for 2 seconds to access the main setup mode. • Main setup menu is displayed on the monitor screen. 2. Select
13 SSDR(Super Dynamic Range) SSDR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the over
14 ※ The five white balance control modes are as follows. ▶ ATW (Auto Tracking White Balance): Select This when the color temperature is betw
15 BACKLIGHT When there is a strong backlight behind the object, clear images of the Background as well as the object can still be obtained by usin
16 Enhancement level. Select „HLC‟ to adjust the HLC MASK TONE and LEVEL. ☞ Notes MOTION DET. This product has a feat
17 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. ① Please press the SETUP button. -
18 • START ZOOM : Use the left or right button in the „START ZOOM‟ item to select the zoom position from 1x to 27x (or 33x) to be returned after
19 • MANUAL : Select 'MANUAL' and press the SET button to confirm. Increase or decreas
2 1. Precautions 3 2. Features 4 3. Products Components 5 4. Name and Functions of Each Parts 6 1) Front 2) Back 5. Connection 9 1) Connectin
20 • AUTOTRACK: Zooming in while deciding or adjusting the status of the focus. • TRACK: Zooming in with no relevance to the focus. • OFF: Only the
21 ☞ Notes When the DIS is enabled, you cannot use the D-ZOOM. ▶ ZOOM POS INIT : Moves to the controlled ZOOM position when the power t
22 ● PRESET NO : Up to 128 preset configurations are supported. ● PRESET SAVE : Save configured preset. ● PRESET CLEAR : Clear
23 ▶ BRIGHTNESS : Use this feature to adjust image brightness. Position the indicator over 'BRIGHTNESS' using the UP or
24 • AUTO: The iris is automatically activated upon illumination. • MANUAL: Manual iris configuration. Set 'IRIS' to 'MANU
25 • A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode. • ESC : Automatic shutter speed setting (optimal). Auto operation is possible only when
26 • MEDIUM : MEDIUM range gain value adjustment • LOW : Narrow range gain value adjustment • MANUAL : Selecting gain value range.(5dB~41dB) • O
27 • SSNR function is disabled in AGC mode „OFF‟. ▶ Sens-UP: This feature ensures clear images at night or under low lighting conditions. ① Pos
28 SPECIAL 1. Press the SET button to access the main setup menu and then position the indicator over 'SPECIAL' using the UP or DOWN butt
29 • AREA MODE Mask area display. - TOP : To move the mask area up. - BOTTOM : To move the mask area down. - LEFT : To move the mask area left.
3 Cautions This information is provided to ensure your safety and to prevent any loss, financial, Please read it carefully and use the products
30 ☞ Notes • When “AGC” is set to “OFF”, AUTO MODE cannot be used but, only use “COLOR MODE” and “B/W MODE”. • When Use B/W mode und
31 ▶ IMAGE ADJ : Includes image quality or special function factors. ○1 When the SETUP menu screen is displayed, select „IMAGE ADJ‟ by using the
32 ▶ DISPLAY: Includes image quality or special function factors. • CAM TITLE : Use this feature to designate a name for the camera, which will d
33 ⑤Select on screen position of the CAM TITLE. a. Move the cursor to 'POS' and press SET button. b. The CAM TITLE is display
34 • LANGUAGE : You ca n select the menu language according to your requirements (ENGLISH, Chinese, DEUTSCH, ITALIANO, FRANCAIS, ESPAN
35 Problem Solution No display • Check the power cable and the wiring between the camera and the monitor. • Ensure proper video cable connection
36 Signal system NTSC PAL Image Sensor 1/4” Sony super HAD CCD Total Pixels 811(H)X508(V) 795(H)X596(V) Effective Pixels 768(H)X494(V) 752(H)X
37
4 High Magnification Zoom Lens High 432 x zoom function. (x27 Optical zoom, x16 Digital zoom) High 528 x zoom function. (x33 Optical zoom, x
5 구성물 1. Color zoom camera 2. Instruction Manual 3. Products Components
6 1) Front ①Tripod Mounting Bracket Screw Hole Used to fix tripod mounting bracket on top of the camera. Tripod mounting is attached
7 2) BACK ① Key Buttons ▪ UP (TELE button): To move the arrow indicator to up - To close in on a far object. (ZOOM IN) ▪ DO
8 ☞ Notes • If the Adaptor Power Line is extended improperly, it may cause malfunctions since the camera is affected by unstable voltage condition
9 1) Connecting to Monitor Connect Video Out Jack to the monitor's Video In jack as shown below. • Connect cables with the u
Comentarios a estos manuales