D-MAX DCC-601DV Manual de instrucciones descargar pdf (Pagina 16)

• Select ‘BLC’ to adjust the area to be enhanced by the

WDR function.

☞ Note

• You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’ menu is selected.

• Since the following symptoms may occur according to the ambient illumination when WDR is selected,

set it to OFF.

- Color or screen changes unnaturally.

- Noise appears in the bright part of the screen.

• Since the performance of the WDR function may be affected by the area of the bright part of the screen,

optimize the installation angle for the best WDR performance.

• If you increase LIMIT, the screen display may be distorted.

• For high performance of WDR function, using DC Iris lens rather than manual lens is recommended.

④ DNR

This function reduces the background noise in a low luminance environment.

1. When the SETUP menu screen is displayed, select ’DNR’ by using the Up and Down buttons so that the

arrow indicates ’DNR’ .

2. Select a desired mode using the Left and Right buttons.

● OFF : Deactivates DNR. Noise is not reduced.

● ON : Activates DNR so that noise is reduced

3. Set the DNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction level.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Sin comentarios

D-MAX DCC-601DV Manual de instrucciones Pagina 16